|
รายละเอียดสินค้า:
การชำระเงิน:
|
| end connection:: | Flange connect | Design pressure.: | PN10 , 16 |
|---|---|---|---|
| Filter mesh size.: | as your requirement | Design specific fluid gravity.: | Design specific fluid gravity. |
| Body: | Ductile iron GGG 40 / GGG 50 , Cast Iron GG25 | Filter/ Screen: | SS 304 / SS 316 / Stainless steel |
| Size: | DN 15~ DN300 | Medium: | Water, Oil, Gas Etc., |
| เน้น: | pipeline strainers,industrial water strainers |
||
Model KXT-W Floating Flange Rubber Expansion Joints DN125, PN40,
Table of Materials
|
serial No. |
Portion |
Material |
| 1 |
Main body |
Polarized rubber |
| 2 |
Lining |
Nylon cord fabic |
| 3 |
Frame |
Hard steel wire |
| 4 |
Flange |
Mild steel |
Technical Consition
|
DN mm Nominal core diameter |
32-300(11/4”) | 350-500(14”-20”) |
|
MPa(kg.f/cm²) Working pressure |
1.5(15) | 0.8(8) |
|
MPa(kg.f/cm²) Bursting pressure |
4.5(45) | 2.4(24) |
| Vacuity K Pa(mmHg) | 86.7(650) | |
| Applicable temp.℃ | -15~+60 | |
| Applicable media | Air.Compressed air,water,sea water,hot weak acid,etc. | |
| Both ends of the join can be arbitray deflected for free adjustment of axial or lateral displacement. | ||
Table of Main Paraneters of Nominal Core Dimerer,Length,Displacement Value and Flange
|
Nominal core diameter DN |
Length L (mm) |
No.of bolt n |
Dinameter of bolt hole d0 (mm) |
Diameter of bolt hole canter circle D1 (mm) |
Axial displacement (mm) |
Lateral displacement (mm) |
Angle of deflection (α1+α2) |
|||
| (mm) | (in.) | long | short | |||||||
| 32 | (11/4) | 150 | 130 | 4 | 15 | 89 | 12 | 20 | 14 | 15° |
| 40 | (11/2) | 150 | 130 | 4 | 15 | 98.5 | 12 | 20 | 14 | 15° |
| 50 | 2 | 150 | 130 | 4 | 19 | 121 | 12 | 20 | 14 | 15° |
| 65 | (21/2) | 150 | 130 | 4 | 19 | 139.5 | 12 | 20 | 14 | 15° |
| 80 | (3) | 150 | 130 | 4 | 19 | 153 | 12 | 20 | 14 | 15° |
| 100 | (4) | 150 | 130 | 8 | 19 | 190 | 12 | 20 | 14 | 15° |
| 125 | (5) | 150 | 130 | 8 | 22.5 | 216 | 12 | 20 | 14 | 15° |
| 150 | (6) | 150 | 130 | 8 | 22.5 | 242 | 12 | 20 | 14 | 15° |
| 200 | (8) | 150 | 130 | 8 | 22.5 | 298 | 12 | 20 | 14 | 15° |
| 250 | (10) | 150 | 130 | 12 | 25.5 | 362 | 12 | 20 | 14 | 15° |
| 300 | (12) | 150 | 130 | 12 | 25.5 | 432 | 16 | 25 | 22 | 15° |
| 350 | (14) | 200 | 12 | 28.5 | 476 | 16 | 25 | 22 | 15° | |
| 400 | (16) | 200 | 16 | 28.5 | 540 | 16 | 25 | 22 | 15° | |
| 450 | (18) | 200 | 16 | 32 | 578 | 16 | 25 | 22 | 15° | |
| 500 | (20) | 200 | 20 | 32 | 634 | 16 | 25 | 22 | 15° | |
Flange drill :ANSI 150LB
Please kindly ignore the follow informaiton
FEATURES
• Iron strainers are complete with Flat Face (Series 125YF) or Raised Face (Series 250YF)
flanges in accordance with ASME B16.1.
• Strainer body meets applicable ASME Standard.
• One piece cast body.
• Strainers equipped with bolted cover flange that utilize a flat gasket seal.
• Low pressure drop.
• Upper and lower machined seats.
• 304 SS perforated screens are standard.
• Drain/Blow-off connection furnished with plug as standard.
• Generous screen area and properly proportioned straining chamber to minimize initial pressure
drop while maximizing time between cleanings.
• Compact end to end dimension.
Brief introduction:
The strainer may be used on all types of pipelines to collect granulated foreign substances and
contaminants collected. It can improve the clearance in the medium, and prolong the life of valves
and other equipments. It is suitable for wafer, petroleum and steam.
Mail part & material
Body: gray cast iron, cast iron, ductile iron
Filter: stainless steel
O-ring: NBR
Technical Specification
- Nominal diameter:65～500mm
- Nominal pressure:1.0/1.6/2.5Mpa
STRAINER INSTALLATION INSTRUCTIONS
A . Ensure all machined surfaces are free of defects and that the inside of the
strainer is free of foreign objects.
B . For horizontal pipelines, the strainer should be installed so that the drain
connection is pointed downwards.
C . For flanged end strainers, the flange bolting should be tightened gradually in
a back and forth clockwise motion.
D . Once installed, increase line pressure gradually and check for leakage around joints
E . If the strainer is supplied with a start-up screen, monitor pressure drop carefully.
ผู้ติดต่อ: Mr. Steve
โทร: 0086-21-57626759, 0086-13818096733
แฟกซ์: 86-21-57617555
Iron coating EPDM or NBR Resilient seated Gate Valve PN16 600mm
ที่นั่งปิดผนึกนุ่ม / ยางรองพื้นและลิ้นประตูว่องไวแบบยืดหยุ่นแบบ Full Bore
หมอนรองพื้นแบบนุ่มนวล 10 นิ้วพร้อมซิป SS316 สำหรับสารเคมี
วาล์วประตูน้ำหนักเบาแบบยืดหยุ่น DIN F4 / วาล์วประตูเหล็กดัดอ่อน
Blue WCB / WC6 นำแสดงโดยเหล็กกล้าไร้สนิมวาล์วสำหรับ Power Station / Butt Weld Gate Valve
วาล์วประตูเหล็กหล่อมีดทำจากเหล็กกล้าไร้สนิมอุณหภูมิสูง, วาล์วประตูเกลียว
2 "สวิตช์ SW Socket เชื่อมเหล็กวาล์วประตู / วาล์วเชื่อม Bonnet Gate
1/4'' Perforated Holes Conical Or Basket Type strainer Mounting Between Two Flanges
เหล็กหล่อ A216 ตัวกรองชนิด WCB Y กับตัวกรอง SS304, ปลายแปลน JIS 20K
เตารีดแบบแข็ง GGG40 เครื่องกรองน้ำแบบปรับระดับได้พร้อมปลั๊กสำหรับเวเฟอร์
เครื่องกรองน้ำรุ่น DN50 ~ DN200 ขนาดตัวกรอง 20/40/60/80 ตาข่าย
